Pavaroom is an interior construction board for the cladding of roof slopes, ceilings, interior walls, eaves walls and the inside of exterior walls. The tongue and groove connections enable fast, continuous laying on structural timbers/rafters with a maximum centre-to-centre spacing of 80 cm. The double-sided coating enables use as a vapour barrier and airtight layer. An additional vapour barrier /airtight membrane is not required.
Hence, up to 3 fewer work steps are required than with conventional gypsum plasterboards/gypsum fibreboards. With a weight of 7.20 or 13.20 kg/m2 it is much lighter and is thus very easy to handle. At the same time Pavaroom provides for additional thermal protection, heat protection and noise insulation. Airtight joints to adjacent building parts can be made with Pavafix WIN adhesive tape.
This is a wood material
Wood or timber is the product of trees. A versatile building material it is both durable and renewable.
Pavaroom is an interior construction board for the cladding of roof slopes, ceilings, interior walls, eaves walls and the inside of exterior walls. The tongue and groove connections enable fast, continuous laying on structural timbers/rafters with a maximum centre-to-centre spacing of 80 cm. The double-sided coating enables use as a vapour barrier and airtight layer. An additional vapour barrier /airtight membrane is not required.
Hence, up to 3 fewer work steps are required than with conventional gypsum plasterboards/gypsum fibreboards. With a weight of 7.20 or 13.20 kg/m2 it is much lighter and is thus very easy to handle. At the same time Pavaroom provides for additional thermal protection, heat protection and noise insulation. Airtight joints to adjacent building parts can be made with Pavafix WIN adhesive tape.
Planning a visit? You will find this material in: Cabinet A
Geographic availability
The British Isles. Other branches of Pavatex supply the product Europe wide
Origin / Location of manufacturing / Processing plant
Golbey, France
Application and typical uses of the product
Pavaroom is applied to CLT frames, masonry, stud partitions and ceilings. It is typically covered with a single lime plaster skim coat
Breakdown of Product
Coniferous wood 91.45 %
Paraffin 0.70 %
Polyurea 4.00 %
Basic paper layer (coated on both sides) 3.85 %
Fire-retardant 0.00 %
Embodied energy (Processing plant emissions). How much energy is used to produce the product? kWh per annum or kgCO2
Please refer to the comprehensive Life Cycle Assessment data at the end of this form.
% Recycled Content
Waste Code according to the European Waste Catalogue (EWC) 030105; 170201; 170604