Pavatherm-Combi is an insulating board for wall and roof with multifunctional application options and profiled edge design. It can be used on both sides and can be laid directly on the rafter. Protect against weather exposure.
Over-rafter insulation systems: Pavatherm-Combi can be combined with Isolair and Pavatherm-Plus to make efficient insulation systems. Install Pavatherm-Combi as the first layer and cover with sarking boards. This protects them against weather exposure. As an alternative, Pavatherm-Combi can also be covered with Pavatex ADB sarking lining or Pavatex UDB.
Insulation systems for rear-ventilated facades: Pavatherm-Combi can be used as insulation for rear-ventilated facades, and may be freely exposed to the elements for 60 days at the most. For open facade cladding, Pavatex FBA gives the construction long-term protection from the weather.
Under-rafter insulation systems: Install Pavatherm-Combi under-rafter insulation boards with offset joints, and fix them to the rafters with insulation nails. Fasten the battens to the supporting rafters through the insulation boards. As a variant suitable for rendering: Attach a substructure 40/60 mm (axis spacing a = 34.5 cm) at a right-angle to the rafter axis. Fit Pavatherm-Combi over the full surface parallel to the rafter axis.
The board can be applied into roofs either over or under rafters. It can also be applied in walls, either into studs or existing masonry. Typical finishes include cladding (CLT & brick), tiling, plaster and render
Coniferous wood 95.50 %
Paraffin 0.50 %
Polyurea 4.00 %
Aqueous polymer concentrate 0.00 %
Fire-retardant 0.00 %
It is biodegradable and can also be burnt to produce heat energy
Yes, by: Nature Plus, FSC, QMS
The lifespan of the building